Différences

Ci-dessous, les différences entre deux révisions de la page.

--- tutos:software:systemes:acornbbcmicro [2017/02/02 16:39]
stephco08 [Ajout du système ACORN BBC MICRO]
+++ tutos:software:systemes:acornbbcmicro [2017/02/14 11:16] (Version actuelle)
thesalan
@@ Ligne 1: / Ligne 1: @@
-====== Ajout du système ACORN BBC MICRO ======
+====== Ajout du système Acorn BBC Micro ======
-Auteur : **[[http://forum.hfsplay.fr/membre2.html|micaelo14]] **le 27 avril 2016
+===== Présentation =====
+{{  :tutos:bbc_micro_acorn_system.png?nolink&  }}
-===== Acorn BBC Micro =====
+Acorn est une entreprise britannique qui a construit des micro-ordinateurs de 1978 jusqu'à 2000. Elle est devenue célèbre dans les années 1980 avec son best-seller, le BBC Micro, qui devint l'un des micro-ordinateurs les plus vendus du Royaume-Uni.
-Prendre la version 4.14 de l'émulateur BeebEm.
+Créés pour une utilisation pédagogique, les ordinateurs de la gamme BBC Micro sont réputés pour leur modularité et la qualité de leurs systèmes d'exploitation.
-Nous utiliserons ce module :
+===== Emulateurs compatibles =====
-<code>
+  * [[tutos:software:emulateurs:beebem|BeebEm]]
-MEmu = BeebEm
-MEmuV = v4.14
-MURL = http://www.mkw.me.uk/beebem/index.html
-MAuthor = brolly
-MVersion = 1.0.5
-MCRC = 8C0B0650
-iCRC = 8E9F265F
-mId = 635599773229077671
-MSystem = "Acorn BBC Micro"
-;----------------------------------------------------------------------------
-; Notes:
-; Start BeebEm and go to Options-Preference Options-Select User Data Folder
-; Make sure you set your user data folder to Emulator_Path\UserData
-;
-; Supported Models:
-; BBC Model B
-; BBC Model B + Integra-B
-; BBC Model B Plus
-; BBC Master 128
-;
-; To list the contents of a disk drive so you can find the executable file type:
-; *DISK (or *DR.0 or *DR.1 depending on the drive you want to use)
-; *CAT
-;
-;----------------------------------------------------------------------------
-StartModule()
-BezelGUI()
-FadeInStart()
-settingsFile := modulePath . "\" . moduleName . ".ini"
+===== Installation sous RocketLauncher =====
-configFile := emuPath . "\UserData\Preferences.cfg"
-Fullscreen := IniReadCheck(settingsFile, "Settings", "Fullscreen","true",,1)
+Pour ce tutoriel, le système Acorn BBC Micro a été validé avec la version **4.14** de l'émulateur [[tutos:software:emulateurs:beebem|BeebEm]] et la version **1.0.5** du module //BeebEm//. Des versions plus récentes peuvent être disponible via //RocketLauncherUI//.
-ShowFPS := IniReadCheck(settingsFile, "Settings", "ShowFPS","00",,1)
-EmulatedDriveSounds := IniReadCheck(settingsFile, "Settings", "EmulatedDriveSounds","00",,1)
-Model := IniReadCheck(settingsFile, "Settings" . "|" . romName, "Model","0",,1)
-TapeSpeed := IniReadCheck(settingsFile, "Settings" . "|" . romName, "TapeSpeed","ee02",,1)
-SetTube := IniReadCheck(settingsFile, "Settings" . "|" . romName, "SetTube","false",,1)
-WriteProtectDrives := IniReadCheck(settingsFile, "Settings" . "|" . romName, "WriteProtectDrives","true",,1)
-ChainCommand := IniReadCheck(settingsFile, romName, "ChainCommand","",,1)
-RunCommand := IniReadCheck(settingsFile, romName, "RunCommand","",,1)
-CustomCommand := IniReadCheck(settingsFile, romName, "CustomCommand","",,1)
-TapeLoadingMethod := IniReadCheck(settingsFile, romName, "TapeLoadingMethod","CHAIN",,1)
-RomCfgFile := IniReadCheck(settingsFile, romName, "RomCfgFile","",,1)
-AutobootDisk := IniReadCheck(settingsFile, romName, "AutobootDisk","true",,1)
-MultipleDiskDrive := IniReadCheck(settingsFile, romName, "MultipleDiskDrive","0",,1)
-StringUpper RunCommand, RunCommand
+==== Installation de l'émulateur ====
-If (RomCfgFile) {
+{{page>tutos:software:emulateurs:beebem#installation&nofooter&noheader}}
-RomCfgFile := CheckFile(emuPath . "\UserData\" . RomCfgFile)
-}
-hideEmuObj := Object("ahk_class BEEBWIN",1)    ; Hide_Emu will hide these windows. 0 = will never unhide, 1 = will unhide later
+==== Module ====
-z(romPath, romName, romExtension, 7zExtractPath)
-If romExtension not in .ssd,.dsd,.adl,.adf,.img,.uef
+{{page>tutos:software:emulateurs:beebem#module&nofooter&noheader}}
-ScriptError("The extension " . romExtension . " is not one of the known supported extensions for this emulator.")
-If !FileExist(configFile)
+==== Configuration ====
-ScriptError("Preferences.cfg was not found at " . configFile)
-If Model not in 0,1,2,3
+{{page>tutos:software:emulateurs:beebem#configuration&nofooter&noheader}}
-ScriptError("Model " . Model . " is not one of the known supported systems for this module: " . moduleName . ". Please use the option to configure the type of system needed through RocketLauncherUI.")
-configIni := LoadProperties(configFile)    ; load the config into memory
+==== Ajout du système ====
-SetTube := If SetTube = "true" ? "01" : "00"
-ShowFPS := If ShowFPS = "true" ? "01" : "00"
-EmulatedDriveSounds := If EmulatedDriveSounds = "true" ? "01" : "00"
-Params := Params . "-Data - -DisMenu "
-If ( romExtension = ".uef" ) { ;Tape
+Il ne vous reste désormais plus qu'à ajouter le système dans Rocket Launcher :
-If (TapeLoadingMethod = "RUN") {
-Params := Params . " -KbdCmd ""OSCLI\s2\STAPE\s2\S\nOSCLI\s2\SRUN\s2\S\n"" "
-}
-Else {
-Params := Params . " -KbdCmd ""OSCLI\s2\STAPE\s2\S\nPAGE\s-\S\s6\SE00\nCH.\s22\S\n"" "
-}
-;Alternatives
-;Params := Params . " -KbdCmd ""OSCLI\s2\STAPE\s2\S\nOSCLI\s2\SRUN\s2\S\n"" "
-;Params := Params . " -KbdCmd ""\s'\STAPE\nPAGE\s-\S\s6\SE00\nCHAIN \s22\S\n"" "
-;Params := Params . " -KbdCmd ""\s'\STAPE\n\s'\SRUN\n"" "
-} Else { ;Disk
-If (ChainCommand) {
-Params := Params . " -KbdCmd """ . (If Model = "3" ? "\d0600\S\d0040" : "") . "CH.\s2\S" . ChainCommand . "\s2\S\n"" " ;Loading the Master 128 OS takes longer so we need to simulate a delay before starting to send the commands otherwise not all of it will get through. Then revert it back to the default value of 40ms.
-} Else If (RunCommand) {
-Params := Params . " -KbdCmd """ . (If Model = "3" ? "\d0600\S\d0040" : "") . "OSCLI\s2\SRUN " . RunCommand . "\s2\S\n"" " ;Loading the Master 128 OS takes longer so we need to simulate a delay before starting to send the commands otherwise not all of it will get through. Then revert it back to the default value of 40ms.
-} Else If (CustomCommand) {
-Params := Params . " -KbdCmd """ . (If Model = "3" ? "\d0600\S\d0040" : "") . CustomCommand . "\n"" " ;Loading the Master 128 OS takes longer so we need to simulate a delay before starting to send the commands otherwise not all of it will get through. Then revert it back to the default value of 40ms.
-}
-If (AutobootDisk = "false") {
-Params := Params . " -NoAutoBoot "
-}
-}
-If (RomCfgFile) {
-Params := Params . " -Roms """ . RomCfgFile . """"
-}
-Params := Params . " """ . romPath . "\" . romName . romExtension . """"
+  * Etape //Choose System Name//  :
+      * Name : //Acorn BBC Micro//
-;MultiGame support for disk games (load both disks in the 2 drives)
+  * Etape //Select Emulator//  :
-If ( romExtension != ".uef" ) {
+      * Cliquez sur la loupe et sélectionnez //Acorn BBC Micro//
-RomTableCheck()    ; make sure romTable is created already so the next line can calculate correctly
+      * Cochez //Add Emulator to System instead of Global//
-romCount = % romTable.MaxIndex()
+  * Etape //Select Rom Path(s)//  :
-If romName contains (Disk 1)
+      * Cliquez sur le bouton //+//  et sélectionnez le dossier de vos roms
-{
+  * Etape //Database Creation//  :
-If romCount> 1
+      * Choisissez l'action que vous désirez concernant la base de données des jeux
-{
+  * Etape //Overview//  :
-Params := Params . " """ . romTable[2,1] . """"
+      * Vérifiez la configuration et cliquez sur //Finish//
-}
-}
-}
-;Set the properties in the preferences.cfg file
-;Yes, ShowFSP is not a typo on our side. The BeebEm emulator authors made this typo so we have to use it.
-WriteProperty(configIni,"ShowFSP", ShowFPS)
-WriteProperty(configIni,"DiscDriveSoundEnabled", EmulatedDriveSounds)
-WriteProperty(configIni,"RelaySoundEnabled", EmulatedDriveSounds)
-WriteProperty(configIni,"TapeSoundEnabled", EmulatedDriveSounds)
-WriteProperty(configIni,"MachineType", "0" . Model)
-WriteProperty(configIni,"KeyMapping", "00009c62")
-WriteProperty(configIni,"TubeEnabled", SetTube)
-WriteProperty(configIni,"Tape Clock Speed", TapeSpeed)
-SaveProperties(configFile,configIni)    ; save changes to Preferences.cfg
-BezelStart()
-Fullscreen := If Fullscreen = "true" ? "-FullScreen " : ""
-HideEmuStart()
-Run(executable . " " . Fullscreen . Params, emuPath)
-WinActivate, ahk_class BEEBWIN
-WinWaitActive("ahk_class BEEBWIN")
-If (WriteProtectDrives = "false")
-{
-PostMessage, 0x111, 40064,,,ahk_class BEEBWIN
-PostMessage, 0x111, 40065,,,ahk_class BEEBWIN
-}
-If bezelPath {
-WinGetPos,,, initialwidth,, ahk_class BEEBWIN
-W:=
-timeout := A_TickCount
-Loop {
-Sleep, 50
-WinGetPos,,, W,, ahk_class BEEBWIN
-If (W != initialwidth)
-Break
-If(timeout <A_TickCount - 2000)
-Break
-}
-}
-Sleep, 50
-BezelDraw()
-HideEmuEnd()
-FadeInExit()
-Process("WaitClose", executable)
-zCleanUp()
-BezelExit()
-FadeOutExit()
-ExitModule()
-HaltEmu:
-Return
-RestoreEmu:
-Return
-MultiGame:
-If ( romExtension = ".uef" )
-Control := "40108"
-Else
-Control := If MultipleDiskDrive = "1" ? "40023" : "40002"
-PostMessage, 0x111, %Control%,,, ahk_class BEEBWIN
-OpenROM("ahk_class #32770", selectedRom)
-Return
-CloseProcess:
-FadeOutStart()
-WinClose("ahk_class BEEBWIN")
-Return
-</code>
-Pour RL le paramétrer ainsi :
-{{  :tutos:rocketlauncher:acorn_bbc_micro.png?nolink&  }}
-Lien du sujet : [[http://forum.hfsplay.fr/tutos-pour-rocketlauncher-f26/acorn-bbc-micro-t10252.html|http://forum.hfsplay.fr/tutos-pour-rocketlauncher-f26/acorn-bbc-micro-t10252.html]]
+===== Liens =====
+  * Tutoriel d'installation original : [[http://forum.hfsplay.fr/tutos-pour-rocketlauncher-f26/acorn-bbc-micro-t10252.html|http://forum.hfsplay.fr/tutos-pour-rocketlauncher-f26/acorn-bbc-micro-t10252.html]] (Merci à [[http://forum.hfsplay.fr/membre2.html|micaelo14]])

Outils pour utilisateurs

Outils du site

Différences

Outils de la page